Quick Start

This quick guide does NOT replace the full manual. Please read the complete manual for safety and detailed operation.

Charge the Handle

• Fully charge before first use.

• Red LED = charging, Blue LED = full.

• Do not leave unattended while charging.

Adjust Slide & Lock Line Mount

• Set line distance and elevator trim.

• Tighten nuts firmly (material is strong, but avoid excessive force).

Put Receiver in Bind Mode

• Press 'BIND' label while powering on.

• Blue LED flashes when in bind mode.

Bind Receiver to Handle

• Keep receiver close to handle.

• Create new model -> Model Settings -> Bind.

• Solid blue LED = linked.

Connect & Adjust Controls

• Plug in servos/ESC.

• Model Settings -> Channels to adjust direction, endpoints, speed.

Set Failsafe

• Model Settings -> Channels -> Failsafe.

• Set safe positions for signal loss.

Perform Range Check

• Verify link strength before flying.

Fly

• Choose a safe flying location, away from people, animals, buildings, and any objects that could be damaged.

• Once tested and secure, enjoy your flight!