Status Icons

The timer is equipped with an OLED display that provides visual information about its current operating status. Once the flight has started, the display will show different icons corresponding to each of the following statuses:

Delay

Indicates that the wait time for starting the engine has begun. An animation of an hourglass is displayed, which will last for as many seconds as the delay value has been set.

Visit the Delay ​section to learn how to adjust this parameter.

Takeoff curve

This is displayed once the delay has ended and indicates that the flight has begun. An animation of an arrow pointing upwards is displayed, indicating that takeoff has begun. This animation will last according to the value specified for the takeoff curve.

Visit the Takeoff curve ​section to learn how to adjust this parameter.

Flight time

Once the takeoff curve is complete, an animation of an airplane flying is displayed, indicating that the flight time is running. This animation will remain active until the flight time defined in the configuration is over.

Visit the Flight duration ​section to learn how to adjust this parameter.

Landing

It is displayed once the flight time has ended and indicates that deceleration for landing has begun. An animation of an arrow pointing downwards is displayed. This animation will remain for 10 seconds, which is the time it takes to gradually decelerate the RPM to 0.

The screen will automatically turn off after approximately 1 minute of inactivity to conserve battery power. To reactivate the screen, simply press and hold the thumb switch in the center position for a few seconds.