The LM-5X 5CH Receiver must be bound to your handle before it will operate.
Binding is the process that pairs your handle with its receiver so they communicate exclusively—this ensures your signals control only your aircraft and prevents interference from other nearby transmitters.
To perform the binding:
1
Activate Bind Mode on the Receiver
Put the receiver into Bind mode (Turn on the receiver while pressing the binding button on it. You will see the light on the receiver start flashing blue), then you can release the binding button.
2
Select the Binding Option
In the handle, navigate to the option bind.
3
Initiate the Binding Process
A dialog appears indicating the handle is searching for a nearby receiver in Bind mode.
4
Confirm Successful Binding
If the receiver is correctly in Bind mode, binding is immediate: the receiver LED stops flashing and remains solid blue.
5
Handle Binding Timeout
If no Bind-mode receiver is found, the process will automatically stop after several seconds of retries.