> For the complete documentation index, see [llms.txt](https://linemasters-organization.gitbook.io/linemaster-2.4ghz-zephyr/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://linemasters-organization.gitbook.io/linemaster-2.4ghz-zephyr/getting-started/quick-start.md).

# Quick Start

{% hint style="danger" %}
This quick guide does NOT replace the full manual. Please read the complete manual for safety and detailed operation.
{% endhint %}

### Charge the Handle

* Fully charge before first use.
* Red LED = charging, Blue LED = full.
* Do not leave unattended while charging.

### Adjust Slide & Lock Line Mount

* Set line distance and elevator trim.
* Tighten nuts firmly (material is strong, but avoid excessive force).

### Put Receiver in Bind Mode

* Press 'BIND' label while powering on.
* Blue LED flashes when in bind mode.

### Bind Receiver to Handle

* Keep receiver close to handle.
* Create new model -> Model Settings -> Bind.
* Solid blue LED = linked.

### Connect & Adjust Controls

* Plug in servos/ESC.
* Model Settings -> Channels to adjust direction and endpoints.

### Set Failsafe

* Model Settings -> Channels -> Failsafe.
* Set safe positions for signal loss.

### Perform Range Check

* Verify link strength before flying.

### Fly

* Choose a safe flying location, away from people, animals, buildings, and any objects that could be damaged.
* Once tested and secure, enjoy your flight!